F 150 2WD V8-4.6L VIN W (2007)
SuperCrew (Part 2)
Exploded View
Removal and Installation
1. Remove the front door scuff plate.
2. Remove the B-pillar bolt cover.
3. Remove the safety belt trim cover.
4. Remove the B-pillar bolt.
5. Remove the safety belt nut.
-
To install, tighten to 48 Nm (35 lb-ft).
6. Remove the safety belt anchor bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
7. Remove the rear door scuff plate.
8. Position the front seat forward.
9. Pull the safety belt through the B-pillar trim panel.
10. Remove the B-pillar trim panel.
11. To install, reverse the removal procedure.
C-Pillar Trim Panel
C-PILLAR TRIM PANEL