F 150 2WD V8-4.6L VIN W (2007)
3.
NOTE: Passenger seat shown, driver seat similar.
Remove the 6 front seat frame rear support bolts and the support.
-
When installing, install the bolts and torque in the sequence shown.
-
To install, tighten to 30 Nm (22 lb-ft).
Driver seat
4.
Remove the 2 seat track position sensor bracket nuts and sensor.
All seats
5.
NOTE: Driver seat without seat integrated restraints (SIR) shown, others similar.
Remove the seat track control handle retaining clip.
6. NOTE: Driver seat without SIR shown, others similar.
Detach the seat track control handle and remove the outboard seat track.