F 150 2WD V8-4.6L VIN W (2007)
5.
Spray an even coat of Motorcraft® Silicone Spray Lubricant or equivalent, on the sheathing of both parking brake cables where the double cable
clamp will be positioned. (Figure 2)
NOTE
CORRECT PARKING BRAKE SHOE ADJUSTMENT DIMENSION IS 0.027" (0.71 mm).
2006-2008 Model Year Vehicles
1.
Replace the parking brake cable assembly on the affected side of the vehicle only. Refer to WSM, section 206-05.
2.
Correctly position the parking brake cable equalizer to ensure the LH and RH parking brake cables do not twist or bind during operation. (Figure
1)
3.
Inspect the double cable clamp for debris and/or damage. Replace as required.
4.
Use a shop towel to clean the sheathing on both parking brake cables where the double cable clamp will be positioned. (Figure 2)
5.
Spray an even coat of silicone spray, Motorcraft® Silicone Spray Lubricant or equivalent, on the sheathing of both parking brake cables where the
double cable clamp will be positioned. (Figure 2)
NOTE
CORRECT PARKING BRAKE SHOE ADJUSTMENT DIMENSION IS 0.027" (0.71 mm).
