F 150 2WD V8-4.6L VIN W (2007)
Parking Brake Control: Service and Repair
Parking Brake Control
Parking Brake Control
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the LH cowl side trim panel.
3. Release the tension on the parking brake cable.
4. Remove the parking brake release handle bolt and pull the handle assembly down to prevent breaking off the locator tabs.
5. Disconnect the parking brake release handle cable from the parking brake control.
6. Disconnect the parking brake switch electrical connector.
7. Remove the 3 bolts from the parking brake control.
