F 150 2WD V8-4.6L VIN W (2007)
Vehicles equipped with a 4.6L (2V) or 5.4L (3V) engine
9. Using the special tools, remove the cooling fan assembly and position it in the fan shroud.
^
To install, tighten to 55 Nm (41 ft. lbs.).
All vehicles
10. Remove the bolts and the cooling fan shroud and cooling fan.
^
To install, tighten to 6 Nm (53 inch lbs.).
11. If servicing the cooling fan clutch, remove the bolts and separate the fan and the fan clutch.
^
To install, tighten to 17 Nm (13 ft. lbs.).
12. To install, reverse the removal procedure.
