F 150 2WD V8-4.6L VIN W (2007)
3. NOTE: The camshaft roller followers must be installed in their original locations. Record the camshaft roller follower locations.
NOTE: The 3 rearmost camshaft roller followers on the RH side must use special tool 303-567 in the same manner as is shown in the illustration.
Using the special tool, compress the valve spring and remove the camshaft roller follower.
^
Remove all of the camshaft roller followers from the camshaft being serviced.
4. Remove the bolt, camshaft sprocket and camshaft sprocket spacer from the camshaft being serviced.
5. Remove the special tools from the camshaft being serviced.
6. Remove the bolts, camshaft bearing caps and the camshaft.
7. Clean and inspect the camshaft bearing caps.
^
One of the bearing caps contains an oil flow restriction groove. Make sure the groove is free of foreign material.
