F 150 2WD V8-4.6L VIN W (2007)
4. Using a new crankshaft pulley bolt, install the crankshaft pulley bolt and washer. Using the special tool to hold the crankshaft pulley, tighten the
bolt in 4 stages:
^
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
^
Stage 2: Loosen one full turn.
^
Stage 3: Tighten to 50 Nm (37 ft. lbs.).
^
Stage 4: Tighten an additional 90 degrees without exceeding 200 Nm (148 ft. lbs.).
5. Rotate the tensioner clockwise and install the drive belt.
6. Install the cooling fan shroud.
