F 150 2WD V8-4.6L VIN W (2007)
4. Connect the 3 engine wiring harness retainers.
5. Position the oil level indicator and install the bolt.
^
Tighten to 10 Nm (89 inch lbs.).
6. Install the EGR system module-to-exhaust manifold tube.
^
Tighten to 40 Nm (30 ft. lbs.).
7. Position the crankcase ventilation tube and connect the quick connect coupling.
8. Position the power steering reservoir and support bracket assembly and install the 2 power steering reservoir support bracket-to-cylinder head
bolts.
^
Tighten to 40 Nm (30 ft. lbs.).
9. Install the power steering reservoir support bracket-to-thermostat housing bolt.
^
Tighten to 11 Nm (8 ft. lbs.).
10. Install the air cleaner outlet pipe and the air cleaner assembly.
