F 150 2WD V8-4.6L VIN W (2007)
9. Remove the transmission mount nuts.
Four wheel drive (4WD) vehicles
10. Remove the 4 nuts and lower the front stabilizer bar.
RH engine support insulator
11. Remove the starter.
LH engine support insulator
12. Remove the oil level indicator and tube.
13. If removing the LH engine support insulator in a 4WD vehicle, index-mark the front driveshaft flange to the front axle pinion flange.
14. CAUTION: Do not let the driveshaft hang unsupported.
If removing the LH engine support insulator in a 4WD vehicle, disconnect and support the front driveshaft.