F 150 2WD V8-4.6L VIN W (2007)
LH engine support insulator
10. If installing the LH engine support insulator in a 4WD vehicle, align the front driveshaft flange-to-front axle pinion flange at the index mark and
install the bolts.
^
Tighten to 111 Nm (82 ft. lbs.).
11. Install the oil level indicator and tube.
RH engine support insulator
12. Install the starter.
4WD vehicles
13. Install the front stabilizer bar and the 4 nuts.
^
Tighten to 30 Nm (22 ft. lbs.).
All vehicles
14. Install the transmission mount nuts.
^
Tighten to 103 Nm (76 ft. lbs.).