F 150 2WD V8-4.6L VIN W (2007)
14. NOTE: LH side shown, RH similar.
Tighten the heat shield bolts to the transmission crossmember.
^
Tighten to 15 Nm (11 ft. lbs.).
4.6L and 5.4L engines
15. Connect the LH HO2S sensor electrical connectors.
All engines
16. Connect the 2 catalyst monitor sensor electrical connectors.
17. If equipped, install the skid plate.
18. Align the exhaust system and tighten the exhaust system clamps.
