F 150 2WD V8-4.6L VIN W (2007)
6. Disconnect the suction accumulator inlet fitting.
-
Discard the O-ring seals.
7. Remove the 2 suction accumulator bracket nuts.
-
To install, tighten to 9 Nm (80 lb-in).
8. Remove the suction accumulator.
9. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
10. Evacuate, leak test and charge the refrigerant system.
