F 150 2WD V8-4.6L VIN W (2007)
6.
Liberally apply Motorcraft(R) PTFE Lubricant to the cam tracks. (Figure 2)
7.
Reassemble components in reverse order of removal.
8.
Cycle the control head from panel to defrost mode a few times until the noise is eliminated.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
080809A
2005-2008 F-150,
0.4 Hr.
2006-2008 Mark LT:
Remove Distribution Mode
Door Cam and Replace
Cam Lubricant.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
18471
41
Disclaimer
