F 150 2WD V8-4.6L VIN W (2007)
Oil Temperature Sensor For ECM: Service and Repair
OIL TEMPERATURE SENSOR
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil drain plug and drain the engine oil.
-
To install, tighten to 23 Nm (17 lb-ft).
3. Disconnect the oil temperature sensor electrical connector.
4. Remove the oil temperature sensor.
-
To install, tighten to 21 Nm (15 lb-ft).
5. To install, reverse the removal procedure.
