F 150 2WD V8-4.6L VIN W (2007)
9. Lower the EVAP canister assembly down slightly to disconnect the EVAP canister vent solenoid electrical connector and remove the EVAP
canister vent solenoid harness pushpin retainer.
10. Remove the EVAP canister assembly.
11. Remove the EVAP canister heat shield.
12. Disconnect the EVAP filter-to-EVAP canister hose.
13. Remove the EVAP canister vent solenoid and EVAP filter assembly tube from the EVAP assembly.
14. Separate the EVAP canister vent solenoid from the EVAP filter assembly tube.
15. To install, reverse the removal procedure.
