F 150 2WD V8-4.6L VIN W (2007)
EGR Tube: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE TUBE
Exploded View
Removal and Installation
1. Detach the exhaust manifold-to-exhaust gas recirculation (EGR) system module tube from the exhaust manifold and the EGR system module and
remove the tube.
-
To install, hand start the EGR system module tube fitting at the EGR system module side first, and then the exhaust manifold side.
-
To install, tighten to 40 Nm (30 lb-ft).
2. To install, reverse the removal procedure.