F 150 2WD V8-4.6L VIN W (2007)
Fuel Injector: Description and Operation
FUEL INJECTORS
Typical Fuel Injector
CAUTION: Do not apply battery positive voltage (B+) directly to the fuel injector electrical connector terminals. The solenoids may be
damaged internally in a matter of seconds.
The fuel injector is a solenoid-operated valve that meters fuel flow to the engine. The fuel injector is opened and closed a constant number of times per
crankshaft revolution. The amount of fuel is controlled by the length of time the fuel injector is held open.
The fuel injector is normally closed, and is operated by a 12-volt source from either the electronic engine control (EEC) power relay or fuel pump relay.
The ground signal is controlled by the PCM.
The injector is the deposit resistant injector (DRI) type and does not have to be cleaned. However, it can be flow checked and, if found outside of
specification, a new fuel injector should be installed.
