F 150 2WD V8-4.6L VIN W (2007)
2. Install a new gasket with the raised circle facing the throttle body (TB) adapter.
3. Position the EGR system module and install the bolts.
-
Tighten to 25 Nm (18 lb-ft).
4. Connect the exhaust manifold-to-EGR system module tube the EGR system module.
-
Tighten to 40 Nm (30 lb-ft).
5. Connect the EGR system module vacuum connector.
6. Connect the EGR system module electrical connector.