F 150 2WD V8-4.6L VIN W (2007)
Spark Plug: Service and Repair
SPARK PLUGS
Exploded View
Removal and Installation
1. Remove the ignition coil-on-plug.
2. NOTE:
-
Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.
-
If an original spark plug is used, make sure it is installed in the same cylinder from which it was taken. New spark plugs can be used in any
cylinder.
Remove the spark plugs.
-
To install, tighten to 15 Nm (11 lb-ft).