F 150 2WD V8-4.6L VIN W (2007)
2. Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.).
4. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual control lever nut.
^
Tighten to 33 Nm (24 ft. lbs.).
5. Connect the digital TR sensor electrical connector.
