F 150 2WD V8-4.6L VIN W (2007)
1. CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the
power steering components can result.
Using a suitable suction device, drain the power steering fluid reservoir.
2. Remove the 3 fluid reservoir bolts.
^
To install, tighten to 11 Nm (8 ft. lbs.).
3. Release the reservoir-to-pump hose clamp and disconnect the hose.
4. Release the power steering fluid cooler-to-reservoir hose clamp and disconnect the hose.
5. Remove the power steering fluid reservoir.
6. To install, reverse the removal procedure.
^
Fill the power steering system.