F 150 2WD V8-4.6L VIN W (2007)
10. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place and the cable end is
snapped onto the ball stud. Press the selector lever cable into the bracket and listen for the cable to click in place. Pull back on the selector lever
cable to make sure that it is locked into the bracket. Also make sure that the selector lever cable end is correctly installed onto the ball stud. Pull
back on the selector lever cable end to make sure that the cable end is correctly installed.
Connect the selector lever cable end to the manual lever with the lever in the (D) position.
11. Position the pan magnet into the transmission fluid pan.
12. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage; if not damaged, the gasket should be reused.
Install the transmission fluid pan and gasket.
1
Position the transmission fluid pan and gasket.
2
Install the transmission fluid pan bolts.
^
Tighten to 14 Nm (10 ft. lbs.).
