F 150 2WD V8-4.6L VIN W (2007)
7. Disconnect the electrical connector from the selector lever cable bracket.
8. Disconnect the selector lever cable from the transmission.
1
Unlock the selector lever cable adjustment lock by rotating the lock upward and removing the cable from the manual lever.
2
Disconnect the selector lever cable from the selector lever cable bracket.
9. Remove the 2 bolts and the selector lever cable bracket.
Installation
1. Position the selector lever cable bracket and install the 2 bolts.
^
Tighten to 25 Nm (18 ft. lbs.).