F 150 2WD V8-4.6L VIN W (2007)
10. CAUTION: Failure to route the selector lever cable in the routing clip can allow the cable to rest on exhaust components causing damage to the
cable.
Route the selector lever cable in the routing clip.
11. Verify the vehicle will start in PARK and NEUTRAL. Verify the reverse lamps illuminate in the REVERSE position. If not, check the adjustment
of the transmission range (TR) sensor.
12. Install the 2 screws and the lower dash panel.
Selector Lever Knob
Selector Lever Knob
Removal
1. Depress the bottom of the button. Using a suitable tool, pry forward on the top of the selector lever button and remove the button.
