F 150 2WD V8-4.6L VIN W (2007)
5. Unclip the hydraulic line from the bulkhead.
6. Remove the clutch reservoir.
7. Unlock and remove the clutch master cylinder.
^
Twist the clutch master cylinder counterclockwise 45 degrees to unlock it from the pedal support bracket.
8. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash the surface with
water immediately.
Remove the clutch reservoir, clutch master cylinder and hydraulic line as an assembly.
9. To install, reverse the removal procedure.
-
Install a new clutch master cylinder push rod retainer.
-
If installing a new clutch master cylinder, install a new clutch master cylinder push rod.
