F 150 2WD V8-4.6L VIN W (2007)
Press the transition block away from the centerline of the vehicle, then snap it into the groove. Release the cable tension spring.
7. NOTE: LH side shown, RH side similar.
The transition block is correctly seated when its top edge is ± 10 mm (0.39 in) above the top of the window opening.
8. Install the rear corner trim. For SuperCab vehicles, install the B-pillar trim panel. For SuperCrew vehicles, install the C-pillar trim panel.
All vehicles
9. Install the rear trim panel.
10. Install the rear trim panel pin-type retainers.
11. Install the headliner, for Regular and SuperCab vehicles. For SuperCrew vehicles, raise and reposition the headliner.
