F 150 2WD V8-5.0L (2011)
Instrument Panel Control Module: Customer Interest
Instruments - Unable To Adjust Compass Zone
TSB 11-2-6
02/07/11
UNABLE TO ADJUST COMPASS ZONE
FORD:
2011 F-150
ISSUE
Some 2011 F-150 vehicles built on or before 12/10/2010 and equipped with a compass in the Center Instrument Display (CID) only, when following the
compass zone adjustment procedure in Owner Guide the system may not progress through each zone while pressing and releasing radio preset buttons 7
and 9, and may remain locked in zone 01.
ACTION
Reprogram the Instrument Cluster Module (ICM) to the latest calibration using IDS release 71.02A and higher. This new calibration is not included in
the VCM 2011.1 DVD. Calibration files may also be obtained at the website.
NOTE
VEHICLES EQUIPPED WITH NAVIGATION SYSTEM ARE NOT AFFECTED BY THIS CONDITION.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
110206A
2011 F-150: Reprogram
0.3 Hr.
The Instrument Cluster (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
10849
04
Disclaimer
