F 150 2WD V8-5.4L Flex Fuel (2008)
Keyless Entry Key-Pad: Testing and Inspection
Keyless Entry Keypad Code Programming
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. NOTE: The permanent factory keyless entry keypad code cannot be erased.
Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases
the stored customer code. The door locks lock, then unlock, confirming the code is erased. The existing code does not need to be erased to
program a new customer code.
3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new customer code is
programmed.
4. To exit the programming mode, wait 5 seconds.
