F 150 2WD V8-5.4L Flex Fuel (2008)
Trailer Tow Mirror
Removal and Installation
NOTE: The power folding mirrors must be synchronized anytime the mirrors are folded or unfolded without using the exterior mirror control switch, or
if a new power folding mirror is installed. Refer to Exterior Mirror Motor Synchronization - Power Folding. See: Testing and Inspection/Programming
and Relearning
1. Remove the exterior rear view mirror glass.
2. Remove the 3 exterior rear view mirror motor screws.
3. Disconnect the exterior rear view mirror motor electrical connector.
4. Remove the exterior rear view mirror motor.
5. To install, reverse the removal procedure.
-
If equipped, synchronize the power folding mirrors. Refer to Exterior Mirror Motor Synchronization - Power Folding. See: Testing and
Inspection/Programming and Relearning