F 150 2WD V8-5.4L Flex Fuel (2008)
Disconnect the 2 roof opening panel front drain hoses from the frame.
5. NOTE: Make sure the drain hoses are not kinked during installation.
Disconnect the 2 roof opening panel rear drain hoses from the frame.
6. CAUTION: To avoid damage to the roof opening panel frame, be sure to support the frame when removing the mounting bolts.
Remove the 10 roof opening panel frame mounting bolts.
-
To install, tighten to 9 Nm (80 lb-in).
7. Remove the roof opening panel frame.
8. To install, reverse the removal procedure.
-
Align the roof opening panel.
-
Initialize the roof opening panel motor.