F 150 2WD V8-5.4L Flex Fuel (2008)
1. Remove the seat.
2. Remove the seat backrest.
3. Push the 2 release tabs and remove the head restraint.
4. Remove the safety belt tower cover.
-
Remove the 2 screw covers, 4 screws and safety belt tower cover.
5. Remove the screw and separate the safety belt guide.
6. Lift the backrest trim cover material and release the backrest J-clip.
7. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam.
Invert the backrest trim cover, separate the hook-and-loop fasteners and remove the hog rings on the front of the backrest foam pad.
8. If equipped with map pockets, remove the hog rings from the rear of the backrest.
