F 150 2WD V8-5.4L Flex Fuel (2008)
Camshaft End Play - Push Rod Engines
Special Tool(s)
1. Remove the hydraulic lash adjusters.
2. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.
3. Position the camshaft to the rear of the cylinder block.
4. Zero the indicator.
5. Move the camshaft to the front of the cylinder block. Note and record the camshaft end play.
Camshaft End Play - OHC Engines
Special Tool(s)
1. Using the special tool, measure the camshaft end play.
2. Position the camshaft to the rear of the cylinder head.
3. Zero the indicator.
