F 150 2WD V8-5.4L Flex Fuel (2008)
Material
Removal and Installation
1. Remove the camshafts.
2. Remove the remaining camshaft roller followers from the cylinder head being serviced.
3. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation
into their original locations. Failure to follow these instructions may result in engine damage.
Remove the hydraulic lash adjusters that are being serviced.
4. Inspect the hydraulic lash adjusters.
5. NOTE: Lubricate each of the hydraulic lash adjusters with clean engine oil prior to installation.
To install, reverse the removal procedure.
