F 150 2WD V8-5.4L Flex Fuel (2008)
^
Stage 1: Tighten to 2 Nm (18 lb-in).
^
Stage 2: Tighten to 20 Nm (15 lb-ft).
^
Stage 3: Tighten an additional 60 degrees.
4WD vehicles
6. CAUTION: Use care when positioning the front axle housing, or the vacuum lines to the axle solenoid may become disconnected or
damaged.
Position the front axle housing and loosely install the 3 bolts, aligning the bolt location marks made during removal.
7. Install the front axle housing RH mounting bolt.
^
Tighten to 89 Nm (66 lb-ft).
8. Install the front axle housing LH front mounting bolt.
^
Tighten to 89 Nm (66 lb-ft).