F 150 2WD V8-5.4L Flex Fuel (2008)
17. Connect the heated PCV element electrical connector.
18. Connect the TP sensor and electronic throttle control electrical connectors.
19. Connect the 8 fuel injector electrical connectors.
20. Connect the fuel rail pressure and temperature sensor electrical connector and vacuum connector.
21. Connect the fuel supply tube spring lock coupling to the fuel rail.
22. Position the PCV tube and connect the quick connect coupling.
23. Position the EVAP tube and connect the quick connect coupling to the intake manifold.
24. Connect the heater coolant hose to the coolant bypass.
25. Connect the upper radiator hose to the thermostat housing.
26. Install the generator.
27. Install the air cleaner.
28. Fill and bleed the engine cooling system.