F 150 2WD V8-5.4L Flex Fuel (2008)
5. Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
^
Stage 1: Tighten to 20 Nm (15 lb-ft).
^
Stage 2: Tighten an additional 60 degrees.
6. Connect the CKP sensor electrical connector.
7. Position the power steering pump assembly and install the 3 bolts.
^
Tighten to 25 Nm (18 lb-ft).
8. Using the special tool, install a new O-ring seal on the pressure line fitting.