F 150 2WD V8-5.4L Flex Fuel (2008)
Exhaust Manifold: Service and Repair
Exhaust Manifold - RH
Exhaust Manifold - RH
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the starter. For additional information, refer to Starting System.
3. Remove the RH inner fender well.
4. Remove the 2 exhaust manifold-to-catalytic converter nuts.
^
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the 4 bolts and position the sway bar down.
^
To install, tighten to 30 Nm (22 lb-ft).