F 150 2WD V8-5.4L Flex Fuel (2008)
Coolant Line/Hose: Service and Repair
Coolant Crossover Manifold Assembly 5.4L (3V)
Coolant Crossover Manifold Assembly - 5.4L (3V)
Removal and Installation
1. Remove the intake manifold.
2. Remove the bolts and the coolant crossover manifold assembly.
^
To install, tighten to 10 Nm (89 lb-in).
3. Remove and inspect the gaskets. Install new gaskets if necessary.
4. NOTE: Clean the gasket mating surfaces with metal surface prep. Follow the directions on the packaging.
To install, reverse the removal procedure.