F 150 2WD V8-5.4L Flex Fuel (2008)
1. Release the fuel pressure.
2. Disconnect the battery ground cable.
3. Disconnect the fuel tube safety clip from the male end.
4. Install the special tool and press it into the spring lock coupling.
5. Separate the spring lock coupling.
Connect - Type II
1. Inspect and clean both spring lock coupling ends.
2. NOTE:
-
Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
-
Lubricate the spring lock coupling with clean engine oil to ease assembly.
Align and push the fuel tube spring lock coupling until a click is heard.
