F 150 2WD V8-5.4L Flex Fuel (2008)
3. Position the surface gauge on the same flat, level surface as used in Step 1 and adjust the gauge's arm until the scriber point is located at the lowest
point on the wheel knuckle.
^
Lock the surface gauge in this position.
4. With the surface gauge positioned on a flat, level surface, record the measurement of the surface gauge position (measurement B).
5. Subtract measurement B from measurement A to obtain the front ride height.
^
Refer to Specifications.
Rear Ride Height Measurement, Rear Wheel Drive (RWD) vehicles
