F 150 2WD V8-5.4L Flex Fuel (2008)
3. Release the clamp and disconnect the power steering pump supply hose.
4. Remove the power steering pump pulley.
5. Disconnect the pressure line-to-pump fitting and position the pressure line aside.
^
Discard the Teflon seal.
6. Remove the power steering pump.
4.6L, 5.4L engines
7. Remove the 3 power steering pump bolts.
4.2L engine
8. Remove the 4 power steering pump bolts.
Installation
All vehicles
1. Using the special tool, install a new Teflon seal on the pressure line-to-pump fitting.
4.6L, 5.4L engines
2. Position the power steering pump and install the 3 bolts.
^
Tighten to 25 Nm (18 lb-ft).
4.2L engine
3. Position the power steering pump and install the 4 bolts.
^
Tighten to 25 Nm (18 lb-ft).
All vehicles
4. Position the pressure line and connect the pressure line-to-pump fitting.
^
If equipped with a 4.6L or 5.4L engine, tighten to 65 Nm (48 lb-ft).
^
If equipped with a 4.2L engine, tighten to 20 Nm (15 lb-ft).
5. Connect the power steering pump supply hose and install the clamp.
6. Install the power steering pump pulley.
^
Fill the power steering system.
