F 150 2WD V8-5.4L Flex Fuel (2008)
Remove and discard the upper ball joint nut and separate the ball joint from the wheel spindle.
Installation
1. NOTE: Do not tighten the nuts at this time.
Position the upper arm and loosely install the upper arm bolts and nuts.
2. CAUTION: Use the holding feature to prevent the upper arm ball joint stud from turning while installing the nut.
Connect the ball joint to the wheel spindle and install the upper ball joint nut.
^
Tighten to 115 Nm (85 lb-ft).
3. Install the shock absorber and spring assembly.
4. With the weight of the vehicle resting on the wheels and tires, tighten the upper arm nuts to 150 Nm (111 lb-ft).
5. Check and, if necessary, align the front end.
