F 150 2WD V8-5.4L Flex Fuel (2008)
Wheel Bearing: Service and Repair
Front
Wheel Bearing and Wheel Hub
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do
not use a replacement part of lesser quality or substitute design. Torque values must be used during reassembly to make sure correct
retention of these parts.
1. Remove the wheel and tire.
2. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 bolts and position the caliper and anchor plate assembly aside.
^
Support the caliper and anchor plate assembly using mechanic's wire.
^
To install, tighten to 200 Nm (148 lb-ft).
3. Remove the cotter pin and wheel hub nut retainer.
