F 150 2WD V8-5.4L Flex Fuel (2008)
2. Connect the transmission fluid cooler tubes to the bracket.
3. Install the transmission fluid cooler tubes to the retainer.
4. Connect the transmission fluid cooler tubes to the radiator and the auxiliary transmission fluid cooler if equipped.
5. Install the secondary latches onto the transmission fluid cooler tubes.
6. Position the air deflector and install the fasteners.
7. Position the skid plate and install the bolts (4WD vehicles).
^
Tighten to 15 Nm (11 lb-ft).
8. Fill the transmission with clean transmission fluid specified for this transmission.
9. Check for leaks.