ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - A/T > < Extension Housing Gasket|Page 4474
Page 9
background image

14. Install the front driveshaft shield and install the 2 nuts.

^

Tighten to 18 Nm (13 lb-ft).

All vehicles 

15. NOTE:  Start by filling the transmission with 4.7L (5 qt) of clean transmission fluid.

Fill the transmission to the correct level with clean transmission fluid.

Sensors and Switches - A/T > < Extension Housing Gasket|Page 4474