F150 2WD V8-54L Flex Fuel (2008) - Drive Axles, Bearings and Joints - Ford 88-Inch Ring Gear
Removal
1. Remove the axle shaft.
2. NOTE: If only a new axle shaft oil seal needs to be installed, use care to avoid damaging the axle shaft oil seal bore.
Using a suitable seal remover, remove and discard the axle shaft oil seal.
3. Inspect the rear wheel bearing and axle shaft for wear or damage.
4. Using the special tools, remove the rear wheel bearing.
Installation
1. Lubricate the new rear wheel bearing with axle lubricant.
2. Using the special tools, install the rear wheel bearing.