F 150 2WD V8-5.4L VIN V Flex Fuel (2007)
Part 2
Exploded View
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Remove the 3 upper door latch bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Remove the 3 latch remote control assembly bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the 3 lower door latch bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
6. Release the actuating rod from the rear door interlock.
7. Remove the latch remote control assembly.
8. To install, reverse the removal procedure.
-
Lubricate the upper and lower rear door latches after installation.
Tailgate Latch Remote Control
TAILGATE LATCH REMOTE CONTROL