F 150 2WD V8-5.4L VIN V Flex Fuel (2007)
3. Remove the D-ring bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
4. Remove the safety belt anchor bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
5. Remove the C-pillar trim panel(s) and position aside.
6. Remove the safety belt retractor bolt and the safety belt retractor.
-
To install, tighten to 48 Nm (35 lb-ft).
7. To install, reverse the removal procedure.
8. Check the active restraint system for correct operation.
