F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Multifunction Electronic Control Modules: Service and Repair
Generic Electronic (GEM)/Central Timer (CTM) Module
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Prior to removal of the GEM, it is necessary to upload module configuration information to a diagnostic tool. This information needs
to be downloaded into the new module once installed.
2. Remove the steering column cover.
3. Remove the (A) bulkhead electrical connectors from the (B) instrument panel fuse junction panel.
4. Remove the (A) instrument panel fuse junction panel bolts and remove the (B) interior fuse junction panel nuts.
5. Disconnect the (A) GEM/CTM electrical connectors from the (B) GEM/CTM.
