F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
9. CAUTION: When installing the brake pedal-to-accelerator pedal cable, the brake pedal and the accelerator pedal must be in the same position,
all the way forward or all the way rearward.
Position the accelerator pedal using the bake pedal motor, all the way forward or backward depending on the position of the new brake pedal.
10. Remove the brake pedal-to-accelerator pedal cable from the accelerator pedal, by pulling on the cable retainer.
11. Position the brake pedal in the same position as the accelerator pedal, using the brake pedal motor.
12. Install the brake pedal-to-accelerator pedal cable in the accelerator pedal.
13. If installing a new accelerator pedal, the accelerator pedal will come in the forward or rearward position. Before installing the cable, move the
brake pedal with the motor so it is in the same position as the accelerator pedal.